Specifications include, but are not limited to: 3.1 Actuators - QTY 8 Hayward Valve Actuator HRSN4L8 Actuator Type – Electric Voltage – 220~240VAC Torque Rating – 3540 in/lbs Control – 4-20mA In/Out Chassis – HRSN4A Power Type – AC Chassis Option – Standard Chassis Cycle Speed Sec 60hz Dc – 24 sec Duty Cycle – 0.75 Start Current – 1.7 amps Run Current – 1 amps Lra Current – 1.9 amps Motor Watts – 90W Wiring Diagram Filename – WD16TS-HV Chassis Description – HRSN4A~4D Series On/Off & Proportional Electric Actuators Features and Benefits • Extended Product Range from 300 in-lb to 177,000 in-lb • Powder Coated Aluminum Alloy Housing • ISO5211 Compliant Mounting with Double Square Drive Socket • On/Off or Proportional Control (2-10 vdc / 4-20mA Inputs & Outputs) • NEMA 4/4X/IP67 Environmental Rating • Multiple AC and DC Voltages • Integrated Local Control Stations • Visual Position Indicators • CSA Certified to CSA 22.2 No. 139-10 UL439 for Ordinary Location Applications • Backed by Hayward’s Exclusive 3 Year Warranty • Interchangeable ISO5211 Mounting and Drive Shafts • Positioners • Extended Duty Motors • 3 Position Control • Passive Analog Feedback • Torque Switches • 3 Phase Motor Control Center • IP68 Submersible Rating 3.2 Stem Extensions - QTY 6 Valve Extension BYVK8EX048SS • 48inch Supported Extension • Stainless Steel Housing • Stainless Steel Shaft for 8inch Butterfly Valve 3.3 Butterfly Valves - QTY 6 Hayward Butterfly Valve BYV44080A0EKI00 Pipe Size – 8 in Body Material Type – GFPP Body, Lugged Sealing Material – EPDM Disc Material – GFPP Disc Liner Material – EPDM Operation Type – Actuation Ready Pressure Rating – 150 PSI Cv Coefficient – 2820.0000 Key Features and Benefits • One Piece Injection Molded GFPP Body • GFPP Disc Material • External Disc Position and Flow Indication • Hydro-dynamic Centric Disc for Increased Flow Performance • Over-Sized Liner Face Maximizes Surface Contact with Flanges • 1-Piece 316 Stainless Steel Stem with Threaded Retaining Gland • Stem Bearing and Seal Retainer for Absolute Stem Position and Seal • ISO 5211 Top Flange and Stem Drive • All Sizes Meet ANSI B16.10 / ISO 5752 Narrow Face-to-Face Dimensions • Pressure Rated at 150 PSI/10 Bar in All Sizes @ 70°F Non-Shock • NSF / ANSI 61 and NSF / ANSI 372 Listed