Specifications include, but are not limited to: Purchase and install a new 5-lb, UL APPROVED, ABC Multi-purpose, Dry Chemical household rechargeable fire extinguisher, to be placed under the kitchen sink. HOMEOWNER to SELECT SHINGLES with ALLOWANCE LISTED BELOW FROM IN-STOCK ITEMS at LOCAL VENDOR. ROOFING - GENERAL REQUIREMENTS (FOR DWELLING UNIT) Unless otherwise specified, all material shall be new and match existing as closely as possible for material style, color and method of installation. Seal all edges. Flash and caulk all adjoining surfaces, roofing vents, roofing accessories, including any new roof vents and nails and make weathertight. All cast iron roof penetrations must have new lead boot vent pipe flashing. Contractor shall ensure all roof penetrations are properly and completely connected back to the fixture requiring venting. Replace all drip edge, flashing, rooflng vents, roofing accessories and nails using rustresistant material. lnstall in one continuous operation / pattern. Protect the house contents at all times from exposure to the elements. ATTIC VENTING: lnstall 4 vents (low profile) IVIAI ING: lnstall 30-year, Architectural Shingles CONTRACTOR IS RESPONSIBLE FOR PROPER MEASUREMENT WITH SUBMITTED BID; SOFFIT ONLY: CARPORT SOUTHEAST SIDE AT ROOF JUNCTION and FACIA ONLY: CARPORT SOUTHWEST SIDE AT ROOF JUNCTION Remove and replace existing fascia and soffit in the areas listed above. Frame-in and box-in new soffit material to the underside of the roof eave. Contractor shall ensure there is no gap exceeding 1/4" between the finished front of the new fascia and the drip edge. Contractor shall install addltional bandboard material or two-step finish material, if necessary to ensure proper fit between the drip edge and new fascia for a consistent finished style throughout. New fascia and soffit material to be ofa fiber cement based material of similar style and dimension to adjacent material. Contractor shall properly install aluminum, pre-bent corner trim pieces to all outside fascia corners. Finish with 2-coats elterior latex painting. Paint is to be of similar quality to Behr or Glidden. Match paint as closely as possible to existing color.