Specifications include, but are not limited to: Vendor to furnish and deliver transit bus and Fire apparatus drum and disk brake systems replacement parts and associated hardware and related materials. Vendor shall pick up brake shoe cores, disassemble, clean, inspect, and reline brake shoes with Marathon KVT lining for low floor transit buses, OEM Meritor and Knorr Bremse disc brake pads for 60’ and 40’ disc brake equipped buses and Fire apparatus. Vendor shall return brake shoes in kit form as outlined in the pricing tables. If a brake shoe needs replacing because it does not conform to OEM specifications, an additional charge for the replacement brake shoe may be incurred. Two brake kits are needed to complete one axle assembly. The items listed in the pricing tables for bid comparison purposes only. The award and subsequent Purchase Order is not to be limited to the brake components listed in the pricing tables. Pricing shall include all associated costs including freight. • All parts shall be new and unused Original Equipment Manufacturer (OEM) parts. Substitutes are not acceptable. • Provide pricing for each brake kit and for a replacement brake shoe for each kit. Pricing should include all associated costs including freight. Below is only a sample list transit bus brake parts the City intends to purchase. This is a sampling only; other brake parts may be purchased. Each brake kit shall include, but not be limited, to the following: Gillig Low Floor-Front Brake Drum Kit – Part ID 015FDK-Gillig · Brake shoe & oversize (1X) lining · 82-03344-000 Lock ring · 82-11692-000 Flat washer · 82-27827-000 Anchor Pin · 82-11275-000 Bushing, anchor pin · 82-03283-000 Return spring pin · 82-19602-009 Roller · 82-19126-000 Return spring · 82-03412-000 Flat washer · 82-14740 Cap Screw · 82-32829-001 Cap Screw...