Specifications include, but are not limited to: CHASSIS SPECIFICATIONS: Engine: Inline six cylinder diesel engine with minimum 220 HP. Engine must applicable EPA emissions compliant and certified for that year model. Training on engine for (4) BCS mechanics to be given by OEM Representative at customer facility within 3 months of delivery Frame: Minimum 272” wheelbase to allow for minimum 27.5” seat spacing on each side of bus (seat plan must accompany bid) 10” rear bumper after forming with bracing at corners Page 7 of 7 Spring & Axle: Front axle: 12,000 lbs. with four year warranty to include king pins and bushings, unlimited mileage (no exceptions) Front springs: 10,000 lbs., 2 leaf parabolic Rear axle: 21,000 lbs. with four year warranty, unlimited mileage (no exceptions) Rear spring suspension: 21,000 lbs. Oil lubed front hubs Fuel Tank: 100 gallon capacity, right side fill Tank mounted between frame rails behind rear axle Fuel/water separator with heater and primer pump chassis mounted Transmission: Allison 2500 PTS Series automatic transmission Transynd transmission fluid Transmission temperature gauge