The vehicle shall include the following base features and options: 1. One (1) Class 5 Truck Chassis a. 16,001 – 19,500 GVWR b. Dual Rear Wheel (DRW) c. Four Wheel Drive (4x4) d. Regular Cab e. 169” Wheelbase / 84”CA Base Equipped Chassis f. White Exterior g. 6.7L V8 Diesel Powered Engine or equivalent h. Automatic Transmission i. Limited Slip or Electronic Locking Rear Axle if available j. Cruise Control k. Power Windows and Power Door Locks l. Steel Wheels m. Platform Running Boards n. Exterior Backup Alarm o. Rear View Camera p. Spare Tire, Wheel, and Jack q. 40/20/40 Split Vinyl Bench Seat or equivalent r. Carpet Delete, Vinyl Flooring, or equivalent s. Interior Bodybuilder Up-fit Switches t. Heavy Duty Rubber Floor Mats 2. Arbor Body & Install a. One (1) Steel Forestry / Arbor Body installed on above specified chassis. b. Body design to be 147” long, 77” tall, and 95” wide. c. Floor to be constructed with 12-gauge plate, 7” long sills, and 3” cross sills. d. Sides to be constructed of 14-gauge galvanneal panels. e. Top to be constructed of reinforced 14-gauge galvanneal panels. f. Tailgate to be 24” tall and constructed of 16-gauge galvanneal double panels, opening to 270 degrees. g. Exterior primed and painted for corrosion resistance in white. Interior coal tar epoxy lined. h. Electronic Hoist installed, LB510 or equivalent, in cab push button control and equipped with OSHA approved body up safety prop. i. Box and Hoist to have a minimum 10.4 Ton lift capacity. j. One (1) Steel Underbody Toolbox designed to be 36” long, 20” high, and 18” deep, with T-Handle Latch. k. Include Anti-Sail mud flaps. l. Include Fuel Fill Kit and Brackets. 3. Rear Tow Hitch & Install a. ICC Bumper with combination Pintle / Ball Hitch, rated for 20,000 lb. max gross trailer weight, and 3,000 lb. max tongue weight. b. Standard round 7-blade trailer receptacle wired to chassis and integrated trailer brake controller. c. All hitch and underride components painted black. 4. Safety Lighting & Install a. Amber strobes to be mounted in top corners, front and rear, of arbor body. b. Amber and White strobes, with stop / turn / tail / back-up / strobe capabilities, mounted to bottom apron at rear of body. c. Two (2) chassis mounted LED lights. d. All lights wired to integrated factory body-upfitter switches.