Specifications include, but are not limited to: The installation of (549) smoke detectors located throughout the properties of AMP2 are as follows: 1 Bedrooms = 25 units x 1 bedroom = 25. 2 Bedrooms = 47 units x 2 bedrooms = 94. 3 Bedrooms = 72 units x 3 bedrooms = 216. 4 Bedrooms = 46 units x 4 bedrooms = 184. 5 Bedrooms = 6 units x 5 bedrooms = 30. Grand Total = 549. Installation of smoke detector requirements: Contractors are required to perform all work in accordance with all applicable state and federal and local laws, ordinances, and regulations. It is also the responsibility of the contractor that the smoke detectors are in good operable and working conditions prior to moving on. All trash and debris associated with the installation of mentioned smoke detectors must be cleaned up and removed for the location of the completed installation when the contractor leaves the site. Contractor shall complete installation in accordance with NSPIRE Inspection Protocol...