Specifications include, but are not limited to: 1. Provide 3D scanning of all interior areas below ceilings. Interior shall include all interior architectural, mechanical, and electrical elements (walls, floors, doors, windows, ceilings, casework, lights, diffusers, outlets, etc. and all fixed fixtures & equipment). 2. Provide 3D scanning of all interior above ceiling areas. Interior above ceilings shall include all areas above existing ceilings (structure, piping, ductwork, conduits and fixtures & equipment). Removal and replacement of ceiling tiles to be included as required to perform scanning services. 3. Provide 3D scanning of exterior to show windows, doors, column, canopies, roofs including slopes parapet walls, roof drains, roof top equipment and vents through roof. 4. Provide final building models in latest Revit BIM model software available. Models to include all items noted in above items to be scanned to a “Level of Detail” of 300. 5. The school will be occupied during the scan. Evening and weekend work is to be planned to perform the scan. Ceiling tiles are to be removed and replaced by the vendor as needed. Existing access doors shall be used in locations where hard ceilings exist. In the event there is no access door, the vendor shall cut and repair holes to perform the scan. There will be furnishings in the building during the scan. The Owner will work with the vendor as necessary to identify furniture which needs to be moved.