Specifications include, but are not limited to: INVENTORY SERVICES Inventory areas marked on the 27th and 28th floors. See attached drawings for location of workstations to be inventoried. From this inventory, create a detailed inventory list of the Herman Miller, AO2 components including but not limited to panels, worksurfaces, peds, overhead bins, task lights, connectors, brackets, and duplex outlet type including all finishes. DESIGN SERVICES Prepare CAD drawings, based on approved furniture plan, see attached plan. o Installation plan o As-built plan Develop a detailed parts list based on the installation plan. The parts list shall include inventoried components to be reused in the layout and additional components required to complete the installation. Prepare a quote for the additional components. A separate purchase order will be issued for the new components. INSTALLATION SERVICES Keep the project area orderly, clean and safe at all times. Disassemble workstations, as needed, to support new proposals. Install new workstations per the proposed plans. Wipe down all surfaces after installation. Verify all task lights and electrical outlets function. Prepare a detailed unused parts list for ODOD to use with turn in documents. If unused parts are to be disposed of, vendor to remove from site and determine method of disposal. If unused parts are to be placed in storage, they should be stored complete with top caps and bases secured to the panels. All small accessories should be placed in labeled boxes.