Specifications include, but are not limited to: The City of Round Rock, herein after “the City,” seeks a bid from firms experienced in providing hot-applied, asphalt-based product used to fill cracks and joints in asphalt and cement concrete pavement in warm to very hot climates. This material will be used in streets, highways, and parking lot pavement and should be a medium viscosity product or lower. An anticipated contract award will be made by the City in an amount not-to-exceed $55,000 per year. 2. MATERIAL SPECIFICATIONS: Asphalt crack fill material is used as preventative maintenance on City streets, highways, and parking lots. The material is to perform the same as or better than Polyflex Type 3 asphalt crack fill material. 3. DELIVERY REQUIREMENTS: A. Product shall be delivery to the following location: 910 Luther Peterson Round Rock, Texas 78665 B. All shipments shall be made during normal business hours; Monday through Friday from 7:00am to 5:00pm. Shipments will not under any circumstances be accepted after hours, on weekends, or City holidays. C. All materials shall be delivered on pallets, covered, and wrapped in shrink wrap. 4. CONTRACTOR RESPONSIBILITIES: The Contractor shallA. Comply with all Department of Transportation (DOT) rules and regulations at all times. B. Provide asphalt crack fill material that performs equal to or better than Polyflex Type 3 asphalt crack fill material. C. Provide the City with a current copy of their product’s Safety Data Sheet upon request.