Specifications include, but are not limited to: This Specification outlines the requirements to furnish and deliver Oralite® 5600 Reflective Vinyl Film and Oralite® 210G-30 PVC Laminating Film , or “Approved Equals”, to be used for signage for Pittsburgh Regional Transit’s (PRT’s) transit system, complete as specified herein. The contract duration will be one year from PRT’s Notice to Proceed. 2.1.2 The Oralite® 5600 Reflective Vinyl Film (or “Approved Equal”) shall conform to the following specifications: • Thickness (without liner and adhesive) of 5 mil (average) • Temperature Resistance: Shall adhere to aluminum, -40°F to +200 °F • Fire Rating: ASTM # 84-07 Class “A” • Adhesive Power (FINAT TM-1, after 72-hr, average): Adhered to stainless steel, 3.4 lb/in (to tear of film) • Tensile Strength (DIN EN ISO 527): Along: Min. 10 MPa Across: Min. 10 MPa • Elongation at Break: (DIN EN ISO 527): Along: Min. 100% Across: Min. 100% • Shelf Life (68°F/50% relative humidity): 2 years (in original packaging) • Minimum Life Expectancy: 7 years (based on accepted application procedures on vertical surfaces) • Minimum Application Temperature: 59°F • The film shall conform to flat surfaces, with or without rivets, simple curves, compound curves and corrugations. • The film shall have a pressure activated adhesive for easy sliding, tacking, snap-up and repositioning.; 2.2.1 The Oraguard® 210G-30 PVC Laminating Film, or “Approved Equal”, shall conform to the following specifications: • Thickness (without liner and adhesive) of 2.5 mil • Temperature Resistance: Shall adhere to aluminum, -40°F to +176 °F • Fire Rating: ASTM E 84-07 Class “A” • Adhesive Power (FINAT TM-1, after 24-hr, average): Adhered to stainless steel, 2.74 lb/in • Tensile Strength (DIN EN ISO 527): Along: Min. 19 MPa Across: Min. 19 MPa • Elongation at Break: (DIN EN ISO 527): Along: Min. 130% Across: Min. 150% • Shelf Life (68°F/50% relative humidity): 2 years