Specifications include, but are not limited to:Waste Removal The Contractor guarantees to provide all labor and equipment needed to remove any hazardous or non-hazardous waste from the Authority’s facilities. The cost for labor, equipment, and loading / unloading should be included in the bid quotations per product. If and when, it is necessary or desirable to consolidate any waste, the Contractor shall be responsible for consolidating it at the price quoted for that item. 1. The Contractor shall assume total responsibility for the waste materials until the recycling/disposal/reuse is completed. The contractor is responsible for assessing the locations of the materials where they are located. The contractor will give the location to the Authority Designee. 2. The Contractor must meet all current federal, state, and local regulations, guidelines and ordinances for handling and transportation vehicle wash waste, for recycling/reuse purposes. Transportation of solid/liquid waste for disposal must be conducted by a Licensed New Jersey Solid Waste Transporter. A copy of the license can be submitted with the bid or within three (3) business days of the bid opening. 3. If the Contractor chooses to recycle the waste materials, the Contractor must provide the Authority with copies of all documentation pursuant to the recycling operation, including, but not limited to, recycling credit grant information to the appropriate county, if required. The determination of the suitability of waste material for recycling will be the sole responsibility of the Contractor, who will be responsible for providing all analytical testing which may be required by the state or local agencies for recycling purposes. 4. The Contractor may reuse materials only with the prior written approval of the Authority and, if applicable, the New Jersey Department of Environmental Protection.