Specifications include, but are not limited to: Electrical Specifications of existing kilns/hook ups: Voltage 240v, 1 PHASE Kilowatts 19kw Amp 125A existing, Breaker Panel rated 600A Kilns must be DIRECT WIRED to match existing hookups Dimensions and Design: Front Loading, with approx. 12 cu ft of STACKING space Outside Dimension/Footprint: Existing kilns are approx. 48”w x 48”d x 72”h New kilns must be less than 52”w and 76”h to fit existing space Interior Stacking Space: Stacking space should be approx. 24”w x 24”d x 36”h. Design should facilitate loading and unloading: Door opens fully, unobstructed, Left Hinge preferred. Arched ceiling extends fully to the door to accommodate loading of taller/delicate pieces without tilting Construction of Kiln, Exterior: Kiln frame construction and exterior shell should be made of heavy gauge welded steel, coated for protection from corrosion, including integrated base/stand Base/stand should include bolt-in anchor points (not wheels) Construction of Kiln, Interior: Interior walls should be lined completely with K-Type Insulating Firebrick (NOT hardbrick or fiber); additional insulation may be high-temp fiber or similar Kiln must be rated for regular firings up to Cone 10, approx. 2350’ Heating Elements (coils) should be heavy duty Heating Elements (Coils) should be housed in channelized, Hard-Ceramic Element Holders Heating Elements must be divided into three zones for controlled firing Heating Elements (Coils) must be incorporated into the door construction Instrumentation/Firing Controls: Bartlett-style digital or touch-screen controller system (like V6-CF or Genesis), including: • Multi-Segment Ramp/Soak, Programmable 0 to 2350 F/Cone 10 • 3-Zone Control for Elements • Includes High Limit Back Up Safety Control or similar • Preferrably w/Digital App for monitoring firings and as teaching tool Thermocouples must be Type-S (any upgrade must be included and installed) Must include door shut-off mechanism Venting System: Must include kiln-specific Downdraft Venting System with Controller Additional Accessories: Must include one Shelving Kit per kiln Warranty: Minimum of TWO (2) Years or Standard Manufacturer’s Warranty