Specifications include, but are not limited to: 1) Supply Ford E-350 or E-450 100” cab-axle, ambulance prep equipped, cutaway chassis. 2) Remount customer-supplied Medix Type III module. 3) Re-stripe, re-letter new chassis per existing layout with orange & white reflective. 4) Install all new cab-module seals and mounting absorbers. 5) Inspect, Repair, Replace, or Reuse the existing power distribution system, including the main power distribution board, front and rear switch panels, and the communication cabling amongst them all. 6) Must ensure that the power distribution system works in a like-new manner. 7) Replace all module-to-chassis integration wiring with new. 8) Inspect, Repair, Replace, or Reuse existing warning and scene lights to ensure they function like new. 9) Install new Whelen LED grille lights. 10) Inspect, Repair, Replace, or Reuse existing stop/tail/turn/backup and DOT/clearance lights to like new. 11) Inspect, Repair, Replace, or Reuse existing compartment lights in a new manner. 12) Inspect, Repair, Replace, or Reuse existing dome lights in the module in a new manner. 13) Supply and install a new 1200-watt inverter, 50-amp battery charger, transfer switch, and shoreline outlet. 14) Inspect, Repair, Replace, or Reuse all existing module upholstery and seating to ensure a like-new appearance. 15) Inspect, Repair, Replace, or Reuse the existing HVAC system properly connected to the chassis OEM system in a like-new manner. 16) Reuse the existing cot retention system. 17) Inspect, Repair, Replace, or Reuse the siren to function like new. 18) Install new CPI through-bumper speaker system. 19) Inspect, Repair, Replace, or Reuse door switches to function like new ones. 20) Inspect, Repair, Replace, or Reuse existing backup alarm. 21) Inspect, Repair, Replace, or Reuse the existing backup camera system. 22) Inspect, Repair, Replace, or Reuse all exterior aluminum trim (rockguards, rubrails, drip rails, etc.). 23) Inspect, Repair, Replace, or Reuse existing rubber federates. 24) Inspect, Repair, Replace, or Reuse the existing rear kickplate and bumper. 25) Inspect, Repair, Replace, or Reuse all existing exterior door handles, rotary latches, locks, and other components. 26) Inspect, Repair, Replace, or Reuse all existing exterior door weather-stripping to function like new. pricing