Specifications include, but are not limited to: I. Specification: AMSCO® 110LS Small Steam Sterilizer 1. AMSCO 110LS Scientific Laboratory Steam Sterilizer 2. 16" x 16" x 26" Chamber 3. Prevacuum 4. Single door with single door cabinet 5. Standard Piping: Brass and Copper Threaded 6. Electric Steam Generator - Carbon Steel 7. 120V, 1Ph; 460/480V, 3 Ph (for vac pump &/or steam generator) 8. Auto Flush Integral Generators 9. English Language II. Specification: Installation for 16 Inch Lab 110 (LS) Electric Sterilizer 1. Uncrate the equipment at the site and inspect for shipping damage 2. Assemble or re-erect the equipment 3. Assemble equipment piping packages and accessories where provided 4. Install standard final panels where provided 5. Move the equipment to specified facility location. Customer to provide clear, unimpeded ingress to installation site. No special rigging or rigging equipment is included in this scope unless previously addressed and priced 6. Make all air, steam, water & drain utility connections from building termination to the equipment (maximum of 6ft/1.8m) using flexible or hard-piping* according to local regulations. Proper disconnects, isolation valves, wall or ceiling penetrations to be provided by others. 7. Make electrical connections to the equipment, a service which includes one of the following: supply and fit electrical cable from the junction box within 6ft/1.8m of unit to the electrical connection point according to local regulations. III. Specification: Deinstallation of Small Sterilizers 1. Remove all utility disconnects. 2. Remove and transport equipment to a predetermined location within the same customer facility for pickup and disposal. 3. If removed equipment is to become property of the awarded supplier, it will be held on-site at the designated location for pickup by company representative within a reasonable time, not to exceed five (5) working days.