Specifications include, but are not limited to: 3.1. West of the Linden Street Bridge (Connie Link Amphitheater) – Installation of one light pole and fixture: 3.1.1.Bore conduit from the existing electrical service to the predetermined light pole site. (Approximately 160 feet in total length). 3.1.2.Install one 16-foot steel pole with one LED light fixture. (See steel pole and light fixture specifications below). 3.1.3.Pull wire from the existing electrical service to the new light pole and connect to electrical service. 3.1.4.Install a photocell control for the light fixture. 3.2. East of the Linden Street Bridge (Underwood Park) – Installation of two light poles and fixtures. 3.2.1.Pull wire from the existing electrical service to the existing junction box in the Underwood Park trailhead parking lot. (Approximately 360 feet in total length). 3.2.2.Bore conduit from the existing junction box to the predetermined light pole sites. (Approximately 320 feet in total length). 3.2.3.Install two 16-foot steel poles with a LED light fixture. (See steel pole and light fixture specifications below). 3.2.4.Pull wire from the existing junction box to the two new light poles and connect all to electrical service. 3.2.5.Install a photocell control for each light fixture. 4. Steel pole and light fixture specifications. 4.1. Steel Pole: Lithonia Lighting, Direct Burial Square Straight Steel Pole 4.1.1.Pole Shaft Size: 4 inches x 20 feet (Embedment depth – 4 feet) 4.1.2.Series/Catalog Number: SSSDB 16 4C 4.1.3.Color: Black (DBLXD) 4.1.4.Ordering Information: SSSDB 16 4C DM19AS DBLXD 4.2. Light Fixture: Lithonia Lighting, D-Series LED Area Luminaire 4.2.1.Series/Catalog Number: DSXO LED 4.2.2.Voltage: 120V – 277V 4.2.3.Color: Black (DBLXD) 4.2.4.Ordering Information: DSXO LED P1 30K 70CRI T2M MVOLT SPA DBLXD