Specifications include, but are not limited to: This specification is for a Battery powered smoke blower. The LACoFD will be using the Smoke Blower to assist fire fighters visibility when entering various structures that are saturated with smoke. BRAND: Super Vac - V18-BL-12-AC-SP - Electric/Battery Operated 18" Ventilation Fan with Shore Power or equal Super Vac MM-MAG Misting Ring with Magnetic Mount or equal 1. PHYSICAL ATTRIBUTION: A. Air Movement and Control Association Standard: Shall be tested and certified under Air Movement and Control Association (AMCA) guidelines. B. Blower Construction and Design: The blower shall be of a lightweight portable design, with a 180 degree articulating fan shroud, and powered by Milwaukee M18 batteries or equal. C. Frame: The Roll Cage Frame shall be constructed of lightweight aluminum. The frame shall feature an ergonomically correct handle that may be stowed when not in operation. The frame shall be constructed with flat proof rubber tires. The frame shall be protected with a non- corrosive paint or powder coat. Color shall be black. D. Fan Shroud: The fan shroud shall be constructed of nothing smaller than 16 gauge spun steel. The fan shroud shall feature a stream straightener incorporated into its design. The fan shroud shall accommodate an external misting attachment that is removable. The fan shroud shall rotate 180 degrees The shroud shall meet all OSHA and UL spacing to prevent contact with the blade. E. Weight: Blower shall not exceed 60 LBS with batteries attached. F. Motor: Motor shall be 18V. Motor shall be direct drive. G. Power: Battery power shall be supplied by Milwaukee M18 12.0ah or Milwaukee M18 8.0ah or equal. Shore power shall be available at 120-240V AC and not exceed 15 amps. H. Propeller: Propeller blade shall be at least 18 inches. Propeller shall be constructed in polymer. I. CFM: The CFM shall meet or exceed 9500 cubic feet per minute. J. Dimensions Dimensions shall not exceed 25.5”H x 26”W x 12.5”D K. Suspension The suspension shall be of balanced and matched rubber feet. L. Charging Charging shall be provided by an external multiple bay charging system. 2. PACKAGING: Each blower shall be individually packaged in a cardboard box with model and serial number clearly marked. All shipping documents must include the LACoFD Purchase Order number. Item must be clearly marked with the bid number and the bidder’s name and shall consist of: One (1) Blower Compliment of required batteries for operation along with reserve Misting attachment Charging device.