Specifications include, but are not limited to: Chain link fence fabric shall be DOMESTIC manufactured and shall be made of chain-link fence fabric produced by methods recognized as good commercial practices. Each length of chain-link fence fabric shall be tightly rolled and firmly tied. Each roll shall carry a tag showing the class of coating, the specified wire size, the mesh size, the specified length, and height of fabric in the roll, ASTM designation A392 and the name or mark of the manufacturer. Provide fence fabric in one-piece heights measured between top and bottom of outer edge of selvage. Comply with ASTM A392, CLFMI CLF2445, and with requirements indicated below: 1. Steel Wire Fabric: Zinc Metallic coated. 2. Fabric, 12-feet high, x 50-feet length ± 1%. a. Wire Diameter: 1) 0.148-inch, 9 gage. b. Mesh Size: 2-inch diamond. c. Steel wire helically wound and interwoven in such a manner as to provide a continuous mesh without knots or ties. d. Weight of Metallic (Zinc) Coating: ASTM A392, Type II, Class 2, 2.0 oz/ft² average with zinc galvanized coating applied before weaving. (GBW) e. Coat selvage ends of fabric that is metallic coated before the weaving process with manufacturer's standard clear protective coating. 3. Selvage: Twisted and barbed x knuckled...