Specifications include, but are not limited to: Field Enforcement Bureau of the Comptroller of Maryland is looking for a vendor to supply One, Densitometer to replace old existing equipment for measuring density (for any liquids). Below are the specifications for the new Densitometer. Densitometer Specifications Must be approved to run ASTM D-4052, ASTM D-5002 Methods. Must be able to measure density (for any liquids), API gravity (for petroleum products), and alcohol concentrations (for distilled liquor samples). Must be able to measure density and concentration at 5-digit accuracy. Measuring range should be 0 to 100 ‘C and Pressure up to 145 psi. Preferable measuring time should be 45 seconds or less. Power supply should be 100/120VAC, 50/60HZ. Prefer to have minimum sample amount under 3 ML. Prefer to have a camera feature that displays and stores live images of the measuring cell throughout the entire measurement process. Prefer to have automatic real-time bubble detection feature. Prefer to have a bright, large touchscreen, readable from a distance.