Specifications include, but are not limited to: The street lights will be repainted in strict accordance with the following specifications as provided by BTU and in strict accordance with label instructions. a. Color The ornamental street lights will be repainted in accordance with the following specifications: i) Paint, to be provided by Contractor, is to be PSX 700 two-component, engineered siloxane coating custom blend from PPG Protective & Marine Coatings, ii) All paint is to be sprayed on, brushed or rolled with no runs or drips iii) Coatings shall be applied in strict accordance with coating manufacturer's instructions. b. Mixing and thinning of coatings, including multi-component materials shall be in accordance with coating manufacturer’s instructions. c. Containers shall be kept closed when not in use to avoid contamination. d. The contractor shall not use mixed coatings beyond pot life limits. e. After the primer is cured, the contractor shall brush-apply a stripe coat to critical locations on the cast aluminum such as welds, corners, and edges using a specified intermediate coat. f. Uniformly apply coatings at spreading rate required to achieve dry film thickness (DFT) in accordance with coating manufacturer’s instructions. g. The application of all coatings, including exterior coatings shall be free of film characteristics or defects that would adversely affect the performance of the coating system and affect appearance. h. All work shall be warranted for material and workmanship (to include peeling or washing) for a minimum of one (1) year.