Specifications include, but are not limited to: First aid kits and supplies must meet the FDA’s requirements for good manufacturing practices as outlined in Title 21, CFR, Sections 210 and 820, and be ANSI (Standard Z308.1 most recently published version) compliant. The product(s) supplied, either via a label or manufacturer’s literature, must indicate that they meet the requirements of the referenced ANSI standard. Each unit/package shall be individually boxed and seal wrapped with the required quantity/quantities as specified below. BANDAGES AND DRESSINGS: SAP Material Master No. 10086 – Adhesive Bandage, 1” x 3” Bandages must be individually wrapped to assure sterility. Bandages must not be linked together. Each bandage shall be a minimum of 1-inch-wide by 3 inches long with a nonadherent pad. One (1) package shall contain sixteen (16) bandages. First Aid Only #1-002, or equal; SAP Material Master No. 51530 – Adhesive Patch Bandage, 2” x 4” Bandages must be individually wrapped to assure sterility. Bandages must not be linked together. Each bandage shall be a minimum of 2 inches wide by 4 inches long with a nonadherent pad. One (1) package shall contain six (6) bandages. First Aid Only, No. 1-007, or equal; SAP Material Master No. 10093 – Knuckle and Fingertip Adhesive Bandages Knuckle bandage shall be made of a flexible fabric and measure 1 1/2-inches-wide by 3 inches in length with a non-adherent pad. Fingertip bandage shall be made of a flexible fabric and measure a minimum of 1 ¾ inches wide by 2 inches long with a non-adherent pad. Bandages shall be latex free and individually wrapped to assure sterility. Bandages shall not be linked together. One (1) package shall contain four (4) knuckle bandages and five (5) fingertip bandages. First Aid Only, No. 1-014, or equal...
