Specifications include, but are not limited to: Contractor Responsibilities - 1. TAPE ROLLER OR TAPE GUN USED AT AREAS OBSERVED2. TAPE APPEARS TO EXTEND A MINIMUM OF 1" AT T-JOINT INTERSECTIONS (SHINGLE STYLE) 3. TAPE APPEARS TO BE LAPPED MIN 3" AT HORIZONTAL SEAMS 4. TAPE APPEARS FIRMLY PRESSED ONTO PANEL SURFACE 5. SHINERS (FASTENERS THAT MISSED RAFTERS/BLOCKING) WERE IDENTIFIED AND REMOVED AND TAPED OVER 6. PROPER H-CLIPS ARE BEING USED 7. SPACING BETWEEN PANELS MINIMUM OF 1/8", MAXIMUM OF ½" 8. FLUSH NAILER ATTACHMENT USED TO PREVENT OVER-DRIVEN FASTENERS. 9. CODE APPROVED FASTENERS AND PROPER SPACING OF FASTENERS MEET PROJECT SPECIFICATIONS 10. LONG EDGE (8' SIDE) OF SHEATHING SYSTEM ORIENTED PERPENDICULAR TO THE FRAMING MEMBERS 11. SHORT EDGE (4' SIDE) OF SHEATHING SYSTEM PANELS STAGGERED: MIN 24" 12. SHEATHING PANELS SPAN A MINIMUM THREE FRAMING MEMBERS 13. FRAMING MEMBERS SUPPORT THE ENTIRE EDGE OF THE PANELS
