Specifications include, but are not limited to: Proposed 4 axis machining center must be new. Proposed industrial robot may be a used or demo unit but must meet specifications and warranty requirements as identified in this solicitation. Price should reflect any educational discounts available. Equipment must come with full warranty as required below. Equipment must have the following features. Failure to provide any of the minimum specifications will result in disqualification: Spindle speed minimum 15,000RPM Chip Conveyor Through Spindle Coolant Through Spindle Air TK24040124 -1– Doosan DNM 4500 Vertical Machine Center General Requirements General Specifications TABLE Loading Area 1,000 mm x450 mm (39.37” x 17.72”) Maximum Weight on Table 1320 lbs (600 kg) Table T-slot spacing x width (3)(125 mm) x 18H8 TRAVELS Maximum X axis 31.49" (800 mm) Maximum Y axis 17.71" (450 mm) Maximum Z axis 25" (635 mm) Spindle nose to table 5.9"– 26" (150 – 660 mm) 100% ball bar testing ensures three-dimensional squareness and accuracy. ACCURACY (Per Single Axis) Minimum Positioning ±0.00031" (±0.008 mm) Minimum Repeatability ±0.0002" (±0.005 mm) SPINDLE Taper Size #40 Taper Spindle Speed 0 to 15,000 rpm Max Power Rating 24.8.1 Hp (18.5 kW) Max Torque 86.9 ft-lb (117.8 Nm) @ 15000 rpm Through spindle coolant, Air through Spindle TOOL CHANGER Tool Capacity 30+1 Tool Type CT40 Maximum Tool Diameter 3.15" (80 mm) With Adjacent Pockets Empty 4.19” (125 mm) Maximum Tool Weight 17.6 lbs (8 kg) AVERAGE TOOL CHANGE TIMES Tool-to-Tool 1.2 seconds Chip-to-Chip 4.1 seconds FEEDRATES Rapids on X, Y, Z 1417 ipm (36 m/min) Maximum Cutting Rate 1417 ipm (36,000 mm/min) AXIS MOTORS Max Thrust Rating X 1764 lb Max Thrust Rating Y 1764 lb Max Thrust Rating Z 2353 lb TK24040124-2 – Doosan Cobot M-Series Model M1013 Industrial Robot General Requirements ARM Payload 22lb (10kg) Reach 51.1 in (1,300mm) Weight 72.7 lb (33 kg) Performance Tool Speed 1 m/s Repeatability +/-.002 in Joint Movement all join minimum +/-360 degree/120 degree /s General mobile pedestal stand Gripper attachment I/O link/comm to communicate with machine I/O link/comm to communicate with machine auto doors Teach Pendant Controller.