Specifications include, but are not limited to: 300 Each T40-ALUM-N-N-EMPTY-N-T-B-B-B Traffic Signal Head, 12", Four Section, Aluminum Body, All Sections are LED ready, Tunnel Visors, Black all around, A SIX position terminal block is installed in center section, Signal is bagged and individually cartonized; Set of 2 Pedestrian Activated Flashing Beacons- PAFBs, Per Enclosed Specifications or approved equal. Delivery MUST Be Completed Before June 30TH, 2024; LED traffic signal modules shall be designed as retrofit replacement for existing signal lamps and shall not require special tools for installation. Retrofit replacement LED signal modules shall fit into existing traffic signal housings built to the VTCSH standard and BTD 12 inch Traffic Signal Specifications dated November 8, 1993 without modification to the housing. Installation of a retrofit replacement LED signal module into an existing signal housing shall only require removal of the existing signal lamp components, (i.e. lens, lamp module, gaskets and reflector), and shall be weather tight and fit securely in the housing. The LED signal shall be rated for 100,000 hours of continuous operation from -40 to +74 Degrees Celsius. The LED signal module shall have prominent and permanent directional marking(s), that is, an “UP arrow”, the word “UP” or “TOP”, for correct indexing and orientation within a signal housing. The manufacturer’s name, trademark, serial number and other necessary identification shall be permanently marked on the backside of the LED signal module. A label shall be placed on the LED signal module certifying compliance to this specification.