Specifications include, but are not limited to: • Minimum build volume approximately: 125 mm ×125 mm × 125 mm (x,y,z) • Laser power: 100 – 300 W • Minimum positional accuracy: 20 microns • Scan speed: 400 - 1200 mm/s • Minimum build rate: 5 cm3 /h • Layer thickness: 20 - 100 microns. • Ability to print a variety of metallic alloys including steels, titanium, aluminum, nickel, and tool steel. • Ability to adjust parameters for printing for use in research application associated with powder alloy development. • Machine must come with safety plan including Safety Data Sheets (SDS) for all supplied chemicals and gasses, OSHA requirement, and Job Safety Analysis (JSA) detailing suggested Personal Protective Equipment (PPE) and common hazards during various machine operations. • Quote must provide information regarding all other items required for machine function including gas and chiller. • Quote must include powder restoring recycling system. • Quote must include materials including minimum of 20 kg of steel, titanium, nickel alloys (H13, Inconel 618, maraging, Ti-6Al-4V, SS316. • Quote must include training and three-year maintenance. • Quote must include the cost of shipping and installation. • Quote must include the labor costs for installation at the current State of Oregon prevailing wage rate. • Machine must have a 6 month or less build life cycle.