Specifications include, but are not limited to: MINIMUM SPECIFICATIONS: The City prefers the trailer be made of heavy duty steel, however it will accept proposals of trailers made out of aluminum. Indicate the type of finish, such as “E” coating or powder coating. Appropriate weather proof synthetic material for boat decks. No bunks. Approximately 26’ in length for transporting one INMAR inflatable boat (INM 470-SR-HD) and one Alweld 1652 Jon boat on the bottom deck, as well as storage containers, motors/motor dolly’s, fuel etc. Winches for each deck, to assist with loading and unloading boats. Boat rollers on rear. Four each heavy duty black wheel/tire combo (8 lug) mounted on the dual axles. Two each full size spare tires mounted on hubs, mounted on trailer, to be of the same specs as the trailer tires. Two each 7000 lb. submersible torsion axles (8 lug), with bearing lubricating system both with disc brakes and stainless steel calipers. Electric over hydraulic breaks. One each 2 5/16 in standard coupler. Structural steel heavy duty steel fenders with anti- skid step plates. The boat deck should extend to the inside of the fenders to protect the boat. Rub Rail tie down system that extends the entire length of the trailer. One set of safety chains. Seven way trailer wiring/plug.