10 Base Cabinet manufacturer meeting ANSI A161.1 standards. Cabinet to have 3/4" solid wood Birch frames and 3/4" Birch plywood end panels. Door and drawer faces to be made from Birch wood. Shelves to be 1/2" finish grade wood with smooth edges. Particleboard is not permitted. Cabinets, other than sink base cabinets, to have one drawer. Gray tones. Smart cabinets. 20 Linear feet per kitchen. 10 wall cabinet manufacturer meeting ANSI A161.1 standards. Cabinet face and door frames to be 3/4" solid Birch wood. Flat panel inserts to be 1/4" Birch plywood. Raised panel inserts to be 3/4" Birch plywood. End panels to be 3/4" Birch plywood. Back panels to be 1/4" lauan and shelves to be 1/2" lauan. Particleboard is not permitted. Top edge of cabinet to be placed 7' above floor level. Cabinets over counter tops to be 30" in height. Cabinets over sinks and refrigerators to be 18" in height. Cabinets over range tops to be 15" in height. Gray tones. Smart cabinets. 10 New 8" deep double bowl stainless steel self rimming kitchen sink with two basket strainers. Single control washer less kitchen sink faucet with spray. Faucet to have a maximum flow rate of 2.5 gallons per minute