This house will need a complete waterproofing system. It will need a sump pit dug in with an air tight sealed lid. Must have at least ½ horse submergible sump pump installed. This will need to be piped in PVC, a check valve installed, and discharged to the outside. There will need to be an electrical outlet installed to code at the sump pit location. Exterior penetrations must be caulked. There will need to be a tile or some sort of diversion system to direct the flow towards the pit. Currently there is steel beams installed to reinforced the south wall. Those beams must be left in place when designing the new system. The cinderblock walls will need a waterproof membrane to divert the water down into the tile system. This project needs to be done as if possible future basement finish will most likely be done. Building permit is required before work starts.