Specifications include, but are not limited to: 4” Hose in 100’ sections 208 sections each Hose shall be made from 100% high tenacity synthetic polyester yarn, circularly woven and completely protected by a through-the-weave extruded PVC/Nitrile rubber, forming a single homogeneous construction without the use of glues or adhesives of any type. Hose shall have a ribbed construction to aid abrasion resistance. Hose will meet or exceed requirements of NFPA 1961. Hose shall carry a 10-year written warranty against defects in materials and workmanship. Hose length shall be 100'. Tensile strength of the lining and cover shall not be less than 1200 psi. Hose shall withstand 10,000 cycles on the Taber Abrasion Machine (H-22 Wheel: 0.5 kg), without exposing the liner. Hose shall have a capability of use down to -35 °F. Hose shall have no apparent damage to cover, reinforcement or lining when subjected to the following cold flexibility test: a 50' length of dry hose is to be firmly coiled and placed in a cold box at -35 °F for a duration of 24 hours. Immediately after removal of the hose from the box, hose should be uncoiled and laid out by one operator. Hose shall show no visible signs of cracking to the lining or cover when tested in accordance to ASTM D518 Procedure B (100 pphm / 118 °F / 70 hours). Exposure to sea water and contamination by most chemical substances, hydrocarbons, oils, alkalis, acids and greases must have no effect on the short or long term performance of the hose. Couplings are as required by purchaser, expansion ring threaded, Storz clamp ring, etc.; 4” Hose Clamp 16 each Hebert HC6 hose clamp with mount. Clamp shall be Screw down type. One side is hinged while the other is a spring controlled positive lever lock. Simple and easy to operate. Clamp will not damage the hose. Can be applied by 1 person with ease, simple to operate and quick to release. Clamp will be made of steel and high strength aluminum alloy to last a lifetime. 6" Clamp opening on 6" clamp: 2.5"H x 15"W x 5.5"D. Mount will be included. Hebert Hose Clamp 4” Storz x 2.5” NH Male 16each Storz Side 1 – 4” Storz Male Side 2 – 2.5” NH (NST) Male (National Hose / National Standard Thread) Working Pressure – 300PSI Max Test Pressure – 1000PSI Max Material – T-6061 Aluminum (Aircraft Grade) Finishing – Anodized (99.9% Lead Free) NFPA Standards - 1963, 4.12, 5.1-5.6.4 (Corrosion Resistance) Military Standards – MIL-A-8625 Type III, Class 1 Industrial Standards – International ASTM B221 UL Labs Standards – 236 – 8.1 Through 8.2 USDA Standards – 5100-190C Tables 1-4 Origin – Made In The USA Warranty – 5 Year Manufacture; 4” Storz x 2.5” NH Female 16each Storz Side 1 – 4” Storz Female Side 2 – 2.5” NH/ NST Female Swivel (National Hose/ National Standard Thread) Working Pressure – 300PSI Max Test Pressure – 1000PSI Max Material – T-6061 Aluminum (Aircraft Grade) Finishing – Anodized (99.9% Lead Free) NFPA Standards - 1963, 4.12, 5.1-5.6.4 (Corrosion Resistance) Military Standards – MIL-A-8625 Type III, Class 1 Industrial Standards – International ASTM B221 UL Labs Standards – 236 – 8.1 Through 8.2 USDA Standards – 5100-190C Tables 1-4 Origin – Made In The USA Warranty – 5 Year Manufacture