Specifications include, but are not limited to: • Repairs and Window Replacement: In accordance with drawings titled “Community Development Building Repairs Exterior Scope of Work”, dated March 29, 2024. • Structural Repairs: In accordance with Ashley & Vance structural drawings titled “DC Community Development Bldg Repairs”, dated March 29, 2024. • Exterior Scope of Work: Includes removal of existing sheet metal siding (salvage for reuse), existing felt paper, wood sheathing, insulation (salvage for reuse), and windows. Install angle clips to exterior wall studs and install angle to CMU and to exterior wall per Structural drawings. Replace existing windows per Exterior Scope of Work drawings. Install salvaged insulation, new OSB sheathing, new weather barrier, reinstall salvaged metal siding, repair interior drywall at drywall window wraps and re-paint at window wraps. • Interior Scope of Work includes installation of a new steel angle to tie existing glu-lam beam to existing exterior wall framing from the interior of the building on levels 1 and 2 per Structural drawings. Scope includes removal of existing ceiling tiles (salvage for reuse), cut back existing drywall enough to allow for steel angle install, install angle in four-foot pieces, spray foam gap between top of drywall and steel angle, and re-install acoustical ceiling tiles. SPECIFICATIONS 05 – Metals 1. Provide and install steel angle clips and vertical plates per Structural drawings. 2. Angles and plates are to be prime painted to inhibit rust. Finish painting is not required. 06 – Wood Plastics & Composites 1. Include temporary plywood infills at existing windows. Assumes temporary plywood infills to be reused around the building. 07 – Thermal and Moisture Protections 1. Assumes sheet metal siding to be reused. a. ALLOWANCE 1: Include $15,000 for replacement sheet metal siding to best match existing siding. 2. Assumes reusing existing exterior wall batt insulation. a. ALLOWANCE 2: Include $1,500 to supply new exterior wall batt insulation as needed. 3. Provide and install new weather barrier on new wall sheathing and into window rough openings per manufacturer installation instructions and standard details: a. Basis of Design: DuPont Tyvek CommercialWrap, including DuPont weather barrier sheet flashing for sealing of penetrations and seams.