Specifications include, but are not limited to: 1. The contractor will remove the existing door, closer and panic device. The old door must be discarded off of MSD’s property. 2. Install primed metal 9’ light door with lower raised panel 3. Install upper and lower hinge 4. Install electrified center hinge. 5. Install an 8” x 34” protection plate on the push side of the door. 6. Install Marks Grade 1 Rim Exit Bar 36” or equivalent brand device, hex dogging, satin stainless-steel finish 7. Install exterior lever trim 8. Install MLRK1 motor driven latch or equivalent 9. Install PS220B power supply or equivalent 10. Re-install existing lock cylinder 11. Contractor is responsible for reactivating the Door Access Control to the Galaxy system. This portion may be subcontracted or be subcontracted through HP Secure. 12. Contractor will not be responsible for painting the door and components 13. Contractor will warranty parts for 3 years. 14. Contractor will warranty the installation for 1 year. If any portion of the installation is faulty in that one year, contractor will repair at $0 cost to MSD.