Specifications include, but are not limited to: 1. Quantity of one (1) 1,500 Gallon Refuel/Defuel Bowser (Equipment). 2. Equipment shall be new. 3. Any bid NOT meeting the minimum required specifications and/or requirements specified herein may be rejected. 4. PMGAA reserves the right to inspect and refuse Equipment once delivered based upon the established specifications and/or requirements. 5. Offeror does not need to be the manufacturer of the equipment in order to submit a bid under this IFB. 3. Tank: Stainless steel, single wall, and baffled; 4. Refuel/Defuel system, utilize same pump/hose; 5. Low point fuel sump drain with spring return handle valve; 6. Ball valve to isolate tank; 7. All pipping, fittings, hoses, and hardware: stainless steel and aviation fuel rated and compatible; 8. FACET VF-21 housing with filter (must be easily accessible for filter change); 9. Tank fuel level sight gauge; 10. Mechanical totalizing meter (whole gallons); 11. Differential pressure gauge; 12. Manway with vented cover for inspection