Specifications include, but are not limited to: 2.1 All lamps, ballast, and lighting shall be new and conform to all relevant published Standards for Safety where such have been established for the commodity specified herein. 2.2 All items shall carry UL/ETL certification and bear the UL/ETL listed label. 2.3 Any lamps/ballast, and lighting that do not meet the guarantees set forth in the manufacturer's catalog must be replaced free of charge. The manufacturer's name and part number must be stated on the Bid Form. 2.4 CCSD has used available resources in an attempt to ensure that all speciications and product code numbers are correct. If any part number has changed, please indicate it on the Bid Form. If a specific manufacturer/part is discontinued, replacement items must meet or exceed the minimum specificatiions. Vendors offering a corrected Technical specification sheets and literature must be included. 2.5 Vendors offering items as equivalents to the manufacturer/part referenced must provide sufficient technical specification sheets and literature with bid response to determine if product(s) can be approved by CCSD. This information should be submitted with the response as “Optional – Equivalent Products.” Products with no specification sheets and/or literature may not be considered. CCSD reserves the right to have the final approval for all equivalent products submitted.