1. Wire brush rusted areas on North Pier Catwalk supports and Lighthouses and apply OSPHO rust converter; then along with proper preparations, recoat all needed areas with the matching color of Epoxy Polsiloxane paint. There are 48 steel supports that need minor attention and 28 that require a more extensive attention. There are also multiple areas on the interior and exterior of both lighthouse structures that need the same minor attention. (this is already included below) 2. Replace, treat and recoat 5 deteriorated I-beam support brackets in the interior of the Outer Lighthouse. 3. Re-caulk Inner Lighthouse roof panels and fog horn support pole using Dymonic 100 by Tremco color match caulk. 4. Supply, paint and install a custom-made wood storm door to match second floor wood entry door on the Inner Lighthouse to prevent water intrusion from wind and rain events. Primer and paint for this door must be marine grade to withstand sever weather conditions.