Specifications include, but are not limited to: Mowing frequency shall be determined by the Maintenance Foreman or his Agent. Turf shall be cut at a height of one and one-half to two-inches and no higher than three (3) inches, at the discretion of the Maintenance Foreman or his Agent in writing IE: email or registered mail. Clippings shall not be bagged and placed in dumpster. All hand scraps shall be cleaned after each service. No clumps or windrows of grass shall be left by the mowers. Mowing equipment shall be a shredder or a full flotation rotary mower that will not leave ruts or tracks on lawn and shall be approved by the Maintenance Foreman or his Agent. Mulching blades may be used at the discretion of the Maintenance Foreman or Agent. 1.2.A Anticipated Mowing Frequencies (Estimate of Schedule): January - 1 July - 2 February - 2 August - 2 March - 2 September - 2 April - 2 October - 2 May - 2 November - 2 June - 2 December - 1; 1.3 Edging: All sidewalks and curbs shall be edged to a depth of one-inch and shall be performed concurrently with mowing operations. String trimmers or curb dressers may not be used for edging. Chemical edging is permitted on Class B Areas. 1.4 Fence lines: All fence lines shall be cleaned and cut free of grass, weeds, Tree’s, vines, & etc.: chemical weed eating is acceptable (exception of clear-well/potable water storage tanks)or mechanical means of keeping the fence line and reservoirs clean of weeds, trees and grasses 1.5 Trimming: All string trimming must be done to achieve a height uniform with the mowing height. Trimming must be performed around trees, plant beds, buildings, sidewalks, curbs, equipment, and both sides of fences when possible, and any other plants or structures. All surfaces, streets, fence lines and areas must be kept free of grass, weeds and debris. This task must be completed the same day as the mowing is performed...