The work consists of the following: 1. Mobilization of supplies, equipment, and personnel to site for project execution. 2. Removal & Disposal of damaged timbers, steel wale, and mounting hardware on face of Pier 8 as specified in the attached pictures and scope of work. 3. Remove & Reinstall existing rubber fender elements and hardware. 4. Remove & Reinstall undamaged timbers and Replace hardware. 5. Furnish & Install steel wale and mounting hardware as specified in the attached pictures and scope of work. 6. Furnish & Install 12”x12” timbers and mounting hardware as specified in the attached pictures and scope of work. 7. Furnish & Install 6”x8” timbers and mounting hardware as specified in the attached pictures and scope of work. 8. Demobilization from site.