Specifications include, but are not limited to: Provide all equipment, materials, labor and incidental work necessary to complete the contract according to the plans, specifications and permits for the project. The Steel building components (aside from the anchor bolts) and insulation have been purchased and are on-site. Contractor will comply with all OSHA safety guidelines. Preconstruction meeting is required two (2) weeks prior to proceeding with work. Clatsop County will provide surveying for building offsets to the four corners of the buildings and the storm line construction. Clatsop County will provide a flat site near the finish pad elevation for construction of the building. Contractor is responsible for all foundation excavation. Spoils from excavation may be left in a pile on site at a location determined by the Jewell Foreman. Contractor to install the drainage system for the two south bays per the plan provided. Contractor to construct the foundation and building pad per the design plans by Wisner Engineering taking into account bolt locations indicated on the building plans by Braemar Building Systems. Bolt sizes are per Braemar. Bolt lengths and embedment are per Wisner. Anchor bolts shall be supplied by the contractor. Do not use the garage door rain guard detail in Wisner plans. Option of recessed threshold at garage doors to be chosen at time of construction from the options provided. Contractor to construct steel building in accordance with Braemar Building System plans. Contractor is solely responsible for accurate, good quality workmanship in erecting this building in conformance with this drawing, details referenced in the drawing as well industry standards pertaining to proper erection including proper use of temporary bracing. See design plans for additional notes and instructions. Upon completion of construction, contractor shall remove all temporary appurtenances used for the project. Overhead doors and electrical work to be done under separate bids.