Specifications include, but are not limited to: 1.1. General Description and Construction 1.1.1. The trailer shall be a heavy-duty, removable gooseneck type, designed for paver/construction combination service 1.1.2. 110,000 lb. capacity (distributed load) 1.1.3. Complete with all standard features and accessories normally provided by the manufacturer plus all additional options and accessories specified hereinafter 1.1.4. Must meet all applicable FMVSS, DOT, and ICC Requirement 1.1.5. Main load deck to be four cambered T-1 steel I-beams 1.1.6. Cross members to be on 12” centers (maximum spacing) Comply: ____Yes ____No 1.2. Gooseneck 1.2.1. Removable, high lift, with support cylinder 1.2.2. Positive connection to main deck with lock pin 1.2.3. Non-ground engaging 1.2.4. Swing clearance 84” (minimum) 1.2.5. King pin setting – 15”-18” 1.2.6. Adjustable fifth wheel height 1.2.7. Upper gooseneck area to be covered with aluminum top cover 1.2.8. Hydraulics to be supplied by truck wet kit. 1.2.8.1. Dual ¾” quick-disconnect hydraulic couplers, one (1) male and one (1) female, at front of trailer 1.2.8.1.1. Female: DNP HNV-12-12-C or equal 1.2.8.1.2. Male: DNP HNV-12-12-N or equal Comply: ____Yes ____No 1.3. Dimensions 1.3.1. Length overall – 49’-54’ 1.3.2. Main deck length - 24' min. 1.3.3. Main deck width - 8' 6” 1.3.4. Height of main deck from ground (loaded) – 22” maximum 1.3.5. Ground clearance - 6" 1.3.6. Length of rear deck – 14’-18’ Comply: ____Yes ____No 1.4. Deck Features 1.4.1. Main Deck: Rumber® composite rubber/plastic decking material or equal, full width 1.4.1.1. Minimum 1-3/4” thick with traction surface 1.4.1.2. Maximum cross member spacing must comply with decking material manufacturer’s requirements 1.4.2. Powered full width ramp at front of main deck 1.4.2.1. Full width short ramp, approx. 15 deg, approx 28" 1.4.3. Bucket plate or trough at rear of main deck 1.4.4. Recessed boom trough in rear upper deck with steel plate tray 1.4.5. Load bearing wheel covers Comply: ____Yes ____No 1.5. Axles & Brakes 1.5.1. Two fixed axles, one lift axle, full width 1.5.2. 25,000# capacity each 1.5.3. Hubometer 1.5.4. 49”-55” axle spread 1.5.5. Air ride suspension, automatic/manual +3”/-3” (or greater) height control with manual exhaust valve 1.5.6. Full air-operated brake equipment for all wheels 1.5.6.1. Outboard drums & automatic slack adjusters 1.5.6.2. 12” X 7” (min.) non-asbestos linings 1.5.6.3. Automatic spring brake application on axles upon accidental breakaway 1.5.6.4. 4S/2M ABS anti-lock brake system, Wabco or equal