Specifications include, but are not limited to: ADA Lowered-Floor Minivan Side-Entry Fold-Out Ramp (Chrysler Voyager/Pacifica LX – ) Capacity: This minivan shall be capable of carrying four (4) ambulatory adult forward-facing seated passengers or two (2) passengers seated in mobility aids, in addition to the driver. This minivan shall be made ADA compliant through a modification whereby the vehicle floor area is lowered approximately 13” from the engine toe-pan to the rear axle to meet minimum ADA door opening height requirement (56”). There shall be no modification to any portion of the vehicle roof in meeting the ADA door opening height requirement. A 30” usable clear width manual, 80-degree (nominal) swing-away, fold-up mobility aid ramp is to be mounted vertically and inboard of the curbside passenger sliding door. Chassis: 2024 or Newer Model year Chrysler Voyager/Pacifica LX chassis. • Engine: 3.6 L, V-6, 24V VVT gasoline ESS (engine start/stop) engine, with push button start. • Stereo shall be OEM AM/FM stereo with integrated voice command with Bluetooth and 6 factory installed speakers, Parkview rear back-up camera, Apple Car Play, Google Android Auto, U-Connect 4 with 7” display, and integrated voice command with Bluetooth, • Power front windows with 1-touch up and down, 2nd Row Power Windows. • Transmission: 9-speed automatic, electronically controlled with overdrive • Radiator and Cooling system shall be OEM standard, with coolant recovery system; 50-50 mixture of factory specified antifreeze and water. • The vehicle shall be equipped with 4-wheel disc brakes and a factory Anti-Lock Brake System. Parking Brake: The vehicle shall be equipped with the factory OEM electric park brake and dash warning light. • The vehicle shall be provided with an OEM tilt steering wheel, speed control, and OEM power steering. • Wheelbase: The minivan shall have a 121” minimum wheelbase. • GVWR: The chassis shall offer a minimum GVWR of 6055#. The vehicle as converted shall not exceed the OEM chassis GVWR when fully loaded. • Additional Key and Fob for total of 3 • Rear Mud Flaps Line Protection: All metal, plastic, and rubber fluid lines beneath the vehicle that are altered or exposed as a result of floor modification shall be secure and reasonably protected from road damage. Any fuel and brake line modification/alteration must be of OEM equivalent material or workmanship. Straightening and re-bending OEM brake or fuel lines is strictly prohibited. Fuel Tank: Fuel tank shall be OEM with OEM capacity of (19) gallons minimum with cap-less fuel fill (without discriminator). Tank, fuel lines, and hardware must meet all current FMVSS, including FMVSS 301, as well as all current CARB and EPA requirements and must be OEM equivalent in connection types, etc. The use of worm clamps is limited to that of the OEM. Tank shall be calibrated with the OEM dash fuel gauge.