Work to be included in bid: • Remove building and all foundation/concrete/base rock as shown in the plans. • Cap water and sewer line, place in utility box to be re-used in a later phase. • Construction of a concrete wall for the enclosure to attach to which will house new electrical and irrigation controls. See plans. • Install new electrical enclosure and components to serve the park. Upon completion of electrical enclosure. The shelter, irrigation components, lighting and other misc. electrical in the park shall be fully functional. • Relocate irrigation controller to enclosure. Mark wires prior to removal to be reconnected to new controller location. Where splicing of wires are required. Use 3m watertight connectors approved for inground use. Install a large Carson Valve Box over all splice locations. • Hydro-seed all disturbed areas. o Minimum of 10 lbs. of seed per 1,000 square feet. The quote shall reflect the total compensation for permits, protection, demolition and removal and salvage of materials and wreckage of structures.