All questions and requests for clarification must be submitted online through the Pennbid system. Specifications include, but are not limited to: Bid Area #1: College Ave by College Store to South ATHS (See reference drawings #1 and #2) • 1.5” Mill and pave the parking lot area outlined on the attached sketch. • Clean milled surface, haul away debris, square all corners and edges. • Repair any storm water inlets before paving. • Seal all vertical and horizontal joints and edges with hot liquid asphalt. • Restore striping and markings per the current layout. Bid Area #2: ATHS West-side Loading Dock. (See reference drawing #3) • 1.5” Mill and pave the parking lot area outlined on the attached sketch. • Clean milled surface, haul away debris, square all corners and edges. • Seal all vertical and horizontal joints and edges with hot liquid asphalt. • Restore striping and markings per the current layout. Bid Area #3: West 3d Street to College Ave. to Rose Street (See reference drawing #4) • 1.5” Mill and pave the parking lot area outlined on the attached sketch. • Clean milled surface, haul away debris, square all corners and edges. • Repair any storm water inlets before paving. • Seal all vertical and horizontal joints and edges with hot liquid asphalt. • Restore striping and markings per the current layout. Bid Area #4: BTC-LEC North/Daycare V5, E14 Parking Lot (See reference drawing #5) • 1.5” Mill and pave the parking lot area outlined on the attached sketch. • Clean milled surface, haul away debris, square all corners and edges. • Repair any storm water inlets before paving. • Seal all vertical and horizontal joints and edges with hot liquid asphalt. • Restore striping and markings per the current layout.