Specifications include, but are not limited to: Purchase of a 24’4” Cabin Boat and Trailer for the Department of Natural Resources BPM042938 - 1) General Design: Hull must be 100% composite with stainless hardware to include a stainless-steel rub rail. Vessel must include Zipwake Trim System for automatic trim control and stability. Deck shall be self-bailing fiberglass construction. The cabin shall be semi-enclosed and fiberglass construction and include full Sunbrella canvass enclosure. Glass must include opening windshield with wipers and opening side windows. Cabin seating shall include two Todd Miami chairs atop seat storage boxes. V-berth must have storage compartments of fiberglass construction with cushions and a locking door and cabin escape hatch. Port-a-potty is to be included and secured inside the V-berth. Hull and deck must be white in color. Transom must be notched design and rated for minimum 250hp outboard engine. Hardtop must extend beyond cabin and include stainless roof supports. 2) Dimensions and Capacities: Overall Length (excluding motor)- 24’3” minimum, 24’5” maximum Beam- 8’10”. Draft (engine up)- 15” maximum. Transom Configuration- Notched transom designed for 25” for single outboard. Total weight of vessel, engine, and ¼ tank of fuel- 5400 lbs. maximum. Cabin Height- 6’6” minimum. Console Depth- 2’6” minimum, at deepest depth. Deck Length (from V-berth entrance to stern)- 18’ minimum. Deck Width (measuring the top deck from outside edges)- 8’3” minimum. Fuel Capacity- 100 gallons minimum. 3) Hull: Hull must be completely composite and contain no wood, with a variable degree dead rise...