Specifications include, but are not limited to: Trailer: This specification is intended to describe a 7,000-gallon Brine Liquid Tank Trailer, stainless-steel construction, tandem axle, air suspended trailer with eight (8) pneumatic tires. The trailer shall comply with all current Federal and State Safety Standards for chemical transport. Width of trailer - 102" maximum. The trailer length approximately 45’-0”. The king pin height shall be consistent with a 5th wheel height of approximately 49”-51”. Tank Body: Capacity – 7,000 gallons. Design and construction: Straight Round with Slope to the Rear. Minimum 10-gauge stainless steel shell and end heads. Baffling shall allow for sediment wash out. 20" Full Opening Manway, located near center of the tank, hinged to front. Two (2) 3" Threaded cleanout nozzles on top centerline with solid caps and lanyards. Two (2) 1-1/2" external overturn drain hoses. Two (2) 8" x 21' aluminum hose tubes with doors at rear. Sight gauge / gallonage marker. Bolt-on stainless steel ladder at manway with PPE attachment loop. Full length extruded aluminum catwalk between clean outs with PPE attachment loops. Full coverage aluminum front and rear fenders. Underbody Aero skirting package...