Specifications include, but are not limited to: The electrical contractor shall provide and install all equipment necessary to provide a complete operational sports lighting facility. Items to be provided and installed by the contractor include, but shall not be strictly limited to the following: 3.4.1.1 Demo existing wood poles and attached fixtures. Contractor is responsible for disposal of poles and fixtures. 3.4.1.2 Provide and install two (x2) new lighting Control Panels with contactors in owner designated location. Pardue Field will be on one service and Gordon and Bambino Fields on the other service. 3.4.1.3 Provide and install 120V control circuit to lighting control cabinet for remote on/off control and monitoring. 3.4.1.4 Install new crossarms, fixtures, electrical component enclosures and wire harnesses per manufacturer requirements. 3.4.1.5 Make all necessary electrical connections to ensure the lighting system is fully operational. 3.4.1.6 Position fixtures according to lighting manufacturer specifications. 3.4.1.7 Keep all heavy equipment off playing fields unless necessary and inform owners if travel across field(s) is required. Repair damage to grounds that exceeds that which would be expected. Indentations caused by heavy equipment traveling over dry ground would be an example of expected damage. Ruts and sod damage caused by equipment traveling over wet grounds would be an example of damage requiring repair.