Specifications include, but are not limited to: TRAY CABLE, GENERAL SPECIFICATION; i. Approved Manufacturer; 1. Okonite; 2. Southwire; 3. Belden; 4. General Cable; 5. Service Wire Co. 6. Or approved equal. ii. The cable furnished must be manufactured no more than 24 months prior to receipt of order. iii. The conductors and cable shall be round in shape. iv. Strand copper conductor: ASTM 8, Class B or C. v. AWG designation. vi. Insulation for #14awg and larger must be rated at a minimum of 600V with continuous operation at 90°C in wet or dry conditions, unless otherwise specified; vii. Jacket must be UV resistant, Oil resistant, and Flame resistant. viii. ICEA Method 1; 1. Table E1; 1-Black, 2-White, 3-Red, 4-Green 2. Table E2; 1-Black, 2-Red, 3-Blue, 4-Orange, 5-Yellow, 6-Brown, 7-Red/Black Stripe, 8-Blue/Black Stripe, 9-Orange/Black Stripe, 10-Yellow/Black Stripe, 11- Brown/Black Stripe, 12-Black/Red Stripe; ix. Reel size shall be no greater than 42” and provide the minimum number of reels for the length ordered unless otherwise specified.