1. The grout shall meet the following specifications when prepared according to the manufacturer’s instructions. 2. If the grout is a cementitious type grout, it shall be a non-separating, non-metallic, non-shrink grout 3. If the grout is an epoxy type grout, it does not need to be specified as a non-separating, non-metallic, non-shrink grout but it must meet all relevant specifications tabulated above 4. The grout shall be suitable for underwater placement without requiring de-watering 5. The grout shall be compatible with the SeaShield FX-70 Structural Repair System (or equivalent) and shall bond to the fiberglass jacket as intended by the jacket manufacturer to ensure a complete structural repair 6. Grout supplied shall be compatible with a single cylinder pump such as the Black Jack Auto Reciprocating Single Cylinder Pump with 9HP Hydraulic Power Unit