Specifications include, but are not limited to: • Roof will be taken down to decking free of all staples, nails, and debris. • Remove from Owner's property and legally dispose of all waste materials. • Install ice and water dam in valleys around roof penetrations and around all eaves of the building. • Contractor is to ensure watertight building at the end of the workday and tarp roof in case of inclement weather while project is ongoing. • If leaks occur, Contractor will repair at their expense. • Any damage to landscaping will be replaced at the Contractor's expense. • Existing drip edge to remain. If replacement is necessary, a separate price will be provided for replacement. • Contractor will maintain appropriate public safety throughout length of project. • Full one (1) year labor and material warranty will be supplied by Contractor, submitted at the time of project completion in addition to the shingle warranty. • Site visits can be scheduled through the Specification Contact on the first page of this document. • 7 turbine wind vents will be replaced (5 on building# 3 and 2 on building #4). Specifications are included in this document. • Flashing around the roof penetrations must be inspected by Contractor. If replacement flashing is necessary, it will be a change order. • Contractor will remove and replace decking where 2 metal furnace exhaust vents penetrate the roof on building #3. • Contractor to replace PVC boots on building 3 and building 4 with specified Oatey boots or equivalent. • Ridge vent replaced with specified ridge cap or equivalent. • Shingle Color: Onyx Black Oakridge Owens Corning Shingle or equivalent. • Match existing wind turbines-Whirlybird Lamanco brand or equivalent. • Nail holes that have penetrated the TPO membrane will be patched with appropriate TPO patching materials.