Specifications include, but are not limited to: Vendor to provide a “Used” bleacher set that will fit in an area 138’ long X 45’ in depth. Bleacher shall seat approximately 1,415 persons Bleacher shall be of I-Beam Frame construction with galvanized understructure and drip shield. Bleacher shall be ADA compliant with adequate handicap and companion seating as outlined in the ADA ICC 300. Bleacher shall have an elevated front walkway with elevation approximately 42” above top of finished concrete. (This will allow the front seat and handicap seating a line of sight above the top rail of rodeo arena fencing) Bleacher shall come equipped with 1 set of stairs and 1 ramp. (For purposes of fitting bleacher into confined spaces the ramp may be placed on the North end of the bleacher, outside of the light pole). Rise to Run ratio of all stairs and steps not to exceed 7” to 11” Bleacher shall have 3 aisles with mid-aisle rails. Bleachers to be equipped with chain link fencing. Bleacher shall be equipped with mill finish foot board. Bleacher seats shall be anodized aluminum with clear finish. Vendor shall provide a set of structural drawings, including weights, to provide engineering data for development of engineered concrete support drawings. Engineering and Concrete to be performed by others prior to bleacher installation. Vendor will provide certified engineering stamp validating bleachers for human occupancy. Owner has the right to review and inspect product as desired. Vendor to provide transportation, all material handling and assembly of bleacher.