Specifications include, but are not limited to: 1. Remove all of the existing flooring in the areas indicated on the floor plan. Clean and prepare the existing concrete surface to receive the new flooring in accordance with the manufacturer’s recommendations. 2. Furnish and install (Basis of Design) Milliken Carpet Tile (C): Major Frequency: One, Distortion, Color: DTN211-27-217, Overtone and Milliken Luxury Vinyl Tile (LVT): Natural-Loose Lay, Pike, Color: PIK176-121 Bark flooring, to include all labor, materials, transportation and equipment necessary. 3. Floor covering adhesive shall be approved by flooring manufacturer prior to installation. 4. All new flooring areas to receive 6” Black Rubber Base and Transitions as required. 5. The furniture will have been removed, but there may be minor moving required. 6. Equipment and furnishings are not to be dragged across any surfaces. 7. All demolished material is to be removed from the site by the contractor and disposed of properly. 8. Patch and repair all areas disturbed by the work