Specifications include, but are not limited to: • 12,000 RPM Inline direct drive CAT 40 spindle with duty cycle of 4 hours @ 12,000 RPM with no load • 30 HP spindle with torque rating of 90 ft-Ibf @2000 RPM • Machine travel of 30”x20”x20” (X, Y, &Z) • 4th axis wiring/drives installed and ready to allow for rotary axis to be attached. This requirement must allow third party rotary tables to be connected. • .626 in T-slot width • T-slots in the X and Y direction • Table operating weight of 2,800lbs • Maximum spindle nose to table 4.0” distance • Side mount tool changer 30 tool capacity plus one tool in the spindle. • Chip removal with auger or conveyor system • Through the spindle coolant 300 psi • Programmable coolant nozzle • High pressure flood coolant • Automatic air gun • Window air blast • 55gallon coolant tank • Coolant oil skimmer • Chip tray filter kit • Renishaw part probing with tool setting • Provide riser block for probe • Remote jog handle • Control touch screen • USB file transfer capable • Machine crash protection that prevents machine crashes from things like incorrect tool length offsets • Rigid tapping • Coordinate rotation and scaling • User defined macros • 32GB Memory • High speed machining • Image and video transfer to the control for operator reference information • external high intensity lighting that operates with machine doors opening and closing or manually via switch • Wi-Fi connection • Early power failure detection module • Power surge protection • 500 inches per minute cutting (IPM) feed rate • 700 IPM rapid in X, Y, and Z axis • X and Y motor thrust 3,400 lbf • Z motor thrust 5,600 lbf • 2.5” tool diameter with full carousel and 5.0” diameter with adjacent tool pockets empty • Max tool length of 11” • 10-piece CAT 40 toolholder kit for through the spindle coolant