Specifications include, but are not limited to: Contract Item #1 – Allegheny 16-150C Strip-Cut Shredder, or Equal Must have the ability to cross-cut, particle cut or pierce and tear paper records, staples, paper clips, credit/store cards, CDs/Floppy disks and USB sticks. Must have a minimum capacity of 1,000 pounds per hour. Must be equipped with a material feeding non-slip conveyor belt. Shredded material must be compressed into compact bales, gaylord containers, or waste bags. Must have an automatic oiler for high cutting capacity. Must have a minimum shredding speed of 60 feet per minute. Must be 10 HP or higher. Must be i-sigma compliant. Must be continuous operation. Must have an automatic shut off. Must fit in a 6’9” wide, 24’ long, 10’6” tall operation area. Must have jam free operation. Require 208 Volt or three-phase or above electrical hookup Must come with a 1-year warranty. Pricing should include the cost of manufacturer recommended preventative maintenance (excluding parts and labor) visits every six (6) months for three (3) years. Must include full shipment and installation of equipment, including unloading, rental costs, etc. After the equipment is delivered, installed, and deemed fully functional by the State, the Vendor shall begin preventative maintenance in six months intervals for three years (totaling six visits) thereafter.